General technical data single-channel amplifier modules
Width Maximum sampling rate without linearisation |
mm values/s |
20.3 (4 divs) 19200 |
Limit value switches |
% |
4 |
Number | ||
Reference level |
Gross, net, peak values | |
Reference voltage (freely adjustable) |
−100 ...+100 of measuring range | |
Hysteresis factory setting |
% |
1 of measuring range |
Adjustment accuracy |
% |
0.0033 of measuring range |
Response time |
ms |
1.0 |
with Butterworth filter > 5 Hz | ||
and Bessel filter > 1.25 Hz | ||
Peak value store |
μs |
2 |
Number | ||
Function |
Maximum, minimum | |
Peak combine |
Peak-peak, average | |
Update time |
30 | |
|
|
with Butterworth filter > 250 Hz |
|
|
and Bessel filter > 100 Hz |
Clearing the peak value stores (switching to current value) |
|
within 1 ms, via control inputs |
Holding of the current value/peak value |
|
within 1 ms, via control inputs |
Time constant for envelope curve function |
s |
0.01 ... 10000 |
Control contacts (HCMOS) |
V |
−0.5 to +5.5 |
Inputs (8 lines, connectable as desired) | ||
Permissible input voltage | ||
High level |
V |
min. +4.0 |
Low level |
V |
max. +0.7 |
Schmitt-trigger, hysteresis |
V |
> 1.1 |
Pull-up resistors |
kΩ |
100 |
Outputs (limit value switch, error) |
V |
> 4.0 |
High level with max. 1 mA | ||
Low level with max. 0.7 mA |
V |
< 0.7 |
Internal resistance |
kΩ |
1 |
Nominal (rated) temperature range |
°C [°F] |
−20 ...+60 [−4 ... +140] |
Service temperature range |
°C [°F] |
−20 ...+60 [−4 ... +140] |
Storage temperature range |
°C [°F] |
−25 ...+70 [−13 ... +158] |
Operating voltages |
V |
±14.6...17.0; (< 120 mA) ±7.7...8.3; (< 120 mA)2) |
|
|
+4.9...5.1; (< 150 mA) |
Card format (Euro) |
mm |
100 x 160 |
Weight |
g |
300 |
Connection plug |
IEC 603-2 indirectly | |
Analog outputs Vo1 and Vo2 Nominal (rated) voltage |
V |
±10 V (asymmetrical) |
Permissible load resistance |
kΩ |
> 5 |
Internal resistance |
Ω |
< 5 |
The two output voltages can be used to display the five |
Amplifier output with zero balance | |
signal voltages. |
Output staggered by the tare value | |
Peak value store 1 output (maximum or minimum) | ||
Peak value store 2 output (maximum or minimum) | ||
Peak value store 3 output (peak combine of 1 and 2) | ||
Max. deviation of the analog outputs from the |
mV |
< 3 (< 10 with ML10B) |
digital value | ||
Monitor output for Vo1 via BNC plug on front panel Nominal (rated) voltage |
V |
±10 (asymmetrical) |
Permissible load resistance |
kΩ |
> 1000 |
Internal resistance |
kΩ |
1 |
Effect of a 10K-change of the ambient temperature |
|
|
(effect additional to digital value) |
|
|
on the outputs Vo1 and Vo2: |
|
|
sensitivity |
% |
< 0.08, typ. 0.04 |
zero point |
mV |
< 3 typ. 2 |
Measuring Amplifier System MGCplus - datasheet | PDF, 0.46 Kb |